BT-150N CNC PCD&PCBN tool grinder has reliable performance, which is suitable for mass production of cemented carbide blades, PCD, and CBN blades. When the user uses the equipment, once the centering is completed, the grinding will be completed automatically.
A. Before starting, using, maintaining, or performing any operation, please read this manual carefully. Comply with the operating procedures and information therein. Non-operators are not allowed to use the machine.
B. Wear appropriate safety clothing during operation, glasses,, and gloves to prevent damage from the the metal debris. Please do not wear any rings, watches, necklaces, or loose, flexible clothing. (such as ties, scarves, jackets without buttons, or unzipped overalls, torn clothing, etc.), which can be caught by moving parts of the equipment.
C. If the machine cannot be used in case of malfunction or if there is any operation problem, please respond to the supervisor in time.
D. Before starting the machine, check whether all the safety risks have been eliminated and whether the protective measures are appropriate.
E. The area where maintenance and operation (routine and special maintenance) is carried out must be kept dry and clean, and all maintenance equipment must be in good working order.
F. Any repairs must be made after the equipment is shut down and the power is disconnected. Bare wire lighting is not allowed when conducting leak inspection and testing.
G. Never use detergents, gasoline, solvents, or other flammable liquids. Instead, use permitted non-flammable, non-toxic, commercial solvents.
H. Lubrication is not allowed when the equipment is active.
I. Before making an electrical connection, make sure the voltage and frequency are correct. The electrical connection of the power supply must be well-grounded.
Any operation of electrical systems, such as replacement of fuses, replacement of overload protectors, etc., must be handled by a professional and must be powered off the equipment.
Room 1-6, Building 2, Hongfu Science Park, BeiQiJia Town, Changping District, Beijing, China Factory Address:
Xiangtian Industrial Park, San Zhua Lun Street, Jingan County, Yichun City, Jiangxi Province 330600, China Contact: Zhiyong Shu Mobile:0086-13910819265
Fax: 0086-10-61763316-210 E-mail: [email protected]
Tel-Nub: 0086-10-62965622 0086-13910819265