Demina Precision Machinery Co., Ltd, a professional Carbide tool insert grinding machine manufacturer, we produce BT-150M automatic cutter grinder is suitable for massive production of carbide insert, PCD tool grinder, and CBN grinding machine. BT-150M automatic cutter grinder once centering is finished, grinding will be done automatically. The even consumption of grinding wheel can be measured and compensated by the system, so production with long cycle time can be achieved.
1. CCD Measurement: 2-axis CBN grinding machine, Tool CCD image can be displayed, observed and measured online with help of hairline.
2. Declination Lock: CBN grinding machine the grinding spindle declines along the circular guide smoothly and the radial lock can be made, greatly enhancing the rigidity of the equipment. After declination, the center line of the grinding wheel keeps the same height due to special mechanical design, so coarse and fine grinding can be made without declination adjustment.
3. This machine you can install two types grinding wheel, Vitrified bond diamond bruting wheel and ceramic diamond wheel .the Vitrified bond diamond bruting also call a ceramic bond diamond bruting wheel.
1.In order to facilitate users to operate the machine, Carbide tool insert grinding machine manufacturer also provide the instruction and parts manual, not including the quick-wear part;
2. One-year limited warranty;
3. Delivery time: 45 workdays after we received the deposit if any special requirement can be consulted;
4. Payment terms: T/T, 30% down payment in advance, 70% balance payment before delivery;
5. Package: wooden case;
6. Offer Validity: 90 days;
7. Other business: Export 2-axis CBN grinding machine.
1. No vertical axis: Vertical shaft lifting is not necessary because of height adjusting fixture on the workbench, greatly enhances the stability and rigidity of the machine.
2. 2-axis CBN grinding machine tool automatic rotation: Once input the angle, rotation speed and hold time on the LCD control panel, the tool can rotate automatically to form radius and two straight cutting edges. If you hope to control the process totally, a switch button press can make it a total manual machine like bt-150. The machine only needs one hand to operate. The keen attention controls the most critical factor on the tool, the efficiency, the finish, and the tolerance.
Room 1-6, Building 2, Hongfu Science Park, BeiQiJia Town, Changping District, Beijing, China Factory Address:
Xiangtian Industrial Park, San Zhua Lun Street, Jingan County, Yichun City, Jiangxi Province 330600, China Contact: Zhiyong Shu Mobile:0086-13910819265
Fax: 0086-10-61763316-210 E-mail: [email protected]
Tel-Nub: 0086-10-62965622 0086-13910819265