The Base Of Machine Ismade Of Solid Casting With High Quality.
Contact Us
Tel 0086-10-62965622 0086-13910819265
Email:[email protected]
Address: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

The Base Of Machine Ismade Of Solid Casting With High Quality.


The design background of the insert grinding machine

BT-150HG PCD&PCBN Insert Grinding Machine taper milling cutters are generally used in indexing fixtures. Longer, special-shaped tools need to be machined in both tips. The grinding table can not be moved in the longitudinal direction, and the angle of the two top longitudinal axes can be improved after the tooling, which facilitates the processing of the taper tool and the workpiece.

The process points of the insert grinding machine

1. The T-shaped groove can be milled on the working surface of the curved plate, and the front and rear top seats are installed. The 90° façade is boring and locked to the façade of the fixed plate by the positioning shaft nut. 2. Since the tooling is installed on the fixed plate, the tool can be longitudinally moved and the taper tool can be machined in the two tips. The entire tool can also be adjusted by the two T-slot bolts of the fixed plate.

The principle of the insert grinding machine

The angled bending plate 4 is machined with a T-shaped groove, and the front and rear top seats 2 are locked by the T-shaped slot bolts 3 and the positioning keys 11, and the curved plate fixing plate 6 is fixed to the machine tool by the two T-shaped slot bolts 7. The tabletop is equipped with a bending plate positioning shaft 5, and the turning angle bending plate 4 is inserted into the bending plate positioning shaft 5 to be rotated and adjusted, and locked by a fastening nut 9. The piece 10 is a workpiece support plate fixed to the curved angled plate façade for supporting the tool tooth surface processing.

The use of insert grinding machine

It solves the difficulty of taper workpiece machining in the two tips and adds new tools for tool finishing. The tooling is simple, light, easy to adjust and load, and expands the processing range of the machine tool.   1. The diameter of Grinding wheel: 150mm; 2. Grinding wheel center hole: 40mm; 3. Grinding Spindle Power: 3KW; 4. RPM of Grinding: 500~4,000 RPM; 5. Variable Swing Amplitude: 0-30 mm; 6. Variable Swing Speed: 0-60 times/min; 7. Power Supply: 380V /3 Phase/50Hz; 8. Overall Dimensions L×W×H: 1890×1650×1980mm; 9. Weight: 2000kg.
Learn More Information About Our Products Read More